Certificates and regulations

All

For information! You find all documents in TechTip. Just search on the name and it will appear

  • Quality/ Enivironmental - Certificates We assure our quality and fulfil our ambitions in the field of environmental protection through the following quality documents and certificates (pdf):

  • Fire Swedish Technical Approval SC0836-14 Wall and Door partition 2086 EI 30

  • Fire Swedish Technical Approval SC1457-16 Door partition 2086 EI 60

  • Fire Swedish Technical Approval 1199/94 Wall and Door partition 2050 and 2060 E30, A30, EI15, EI30

  • P-marking 144502 Issued by the Rise Research Institutes Of Sweden (RISE) in Borås

  • Management System Certificate EN ISO 9001

  • Environmental Policy

  • General Terms of Sales and Delivery Download "General Terms of Sales and Delivery" (until 1 April) from Techtip Download "General Terms of Sales and Delivery" (after 1 April) from Techtip

  • Svanen Supply Chain Declaration Portal SCDP SAPA's products as below are declared in the Swan's Supply Chain Declaration Portal, SCDP, which can be used for Swan-labelled buildings (089 generation 4.0). The majority of SAPA's range is manufactured from CIRCAL 75R and thus meets the Swan's requirements.

  • SAPA TENTAL 50 MT

  • SAPA TENTAL 60 MT

  • SAPA 4150

  • SAPA 4150 EI30

  • SAPA 4150 SSG

  • SAPA 4150 SX PH

  • SAPA Door 2086

  • SAPA Door 2086 EI/EI2 30

  • SAPA Door 2086 EI/EI2 30 Sa200

  • SAPA Door 2086 EI/EI2 60

  • SAPA Door 2086 EI/EI2 60 Sa200

  • SAPA Window 1086 Vintage

  • SAPA Window 1086/SX/PX

  • SAPA Sliding door TIGAL

  • SAPA Folding door AMBIA

  • Operation and Maintenance Products should be cleaned regularly to maintain their attractive appearance. Clean products look more attractive, last longer and perform better

  • Cleaning The best cleaning method is to use a sponge and clean water. A mild detergent may however be used.

  • Important Do not use alkaline detergents! Aluminium profiles and glass can be damaged by alkalis and should therefore never be exposed to them. If, for example, concrete or mortar are splashed on to anodised or painted aluminium profiles and/or glass, it is important to wash the splashes off immediately with clean water and a sponge or cloth. Do not use detergents or materials such as Scotch-Brite that contain abrasives! These are likely to damage the surface.

  • Maintenance Products should be checked and adjusted regularly to ensure good performance and a long life. Keep moving components of fittings and sliding mechanisms lightly lubricated to prevent them from seizing. Make sure that aluminium tracks are clean and lightly lubricated with acid-free white Vaseline on outward-opening, sliding horizontal/vertical reversible windows. Check screws in fittings to make sure they are tight and that the fittings are correctly positioned. Check facades, windows, doors and roof glazing to make sure that drainage holes are not blocked, that glazing and gasket seals are well sealed at corners, that opening elements are supported by sliding blocks and that covers are secure.

  • Galvanic corrosion Avoid using materials that could initiate galvanic corrosion in aluminium profiles. Avoid using fasteners that could cause galvanic corrosion when installing solar shading, signs, etc.

We take care of our customers