Fasady

SAPA 4150

SSG-Structural Glazing

Charakterystyka

The 4150 SSG Structural Glazing facade system consists of 50 mm wide insulated aluminium mullions and transoms. The system is based on double glazing units with a warm edge and a specially developed mounting profile for installation fittings. The glass panes are anchored in the mullions and transoms with the help of installation fittings. The weather seal between the glass panes is done with the use of an approved sealing compound, usually black. The design of the inside gasket and the insulating strip optimises the insulation of the profiles.

The mullions are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints. The system also includes opening units, which can be easily integrated. The U value of a facade must be calculated for the entire facade.

Czytaj więcej o Hydro CIRCAL®.

Broszury
SAPA Fasad 4150 SSG

Zalety produktu

RÓŻNORODNOŚĆ ZASTOSOWAŃ

  • Well-insulated profiles
  • Opening window with hidden sash
  • Doors Hinge type and sliding doors can be easily be integrated.

WYSOKIE PARAMETRY

  • Classified According to applicable EN standards

RÓŻNORODNOŚĆ FORM

  • Several mullions and transoms Rectangular (profile depth 35-300 mm), I- and T-shaped profiles give a lot of freedom in interior design

Więcej informacji

Funkcje okuć

Infill panels

Infill panel

For more information please contact our Architect Support

Glazing

Unprotected glazed surfaces that can be reached by persons shall be designed to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.

The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.

Opening units

The facade system can be easily complemented with 4074 outward opening windows and 2086 doors.

The 4074 window system is suitable for integrating in the facade system. The outward opening windows can be provided with fittings for either horizontal or vertical projecting function.

The 2086 door system includes inward and outward opening, single or double leaf doors.

 

- Profile depth 84 mm
- Insulated aluminium profiles
- Rebate for double glazing units

U values for glass facades

Formula for calculating the total U value of a facade, taking into account the glazing unit, the share of profiles and the edge zone effect the linear factor.

Ufasad = ( Ag * Ug + Af * Uf + Ig * ψg )  /  ( Ag + Af )

For more information please contact our Architect Support

                               

Elewacje i szczegóły

A4150-1051 10111617781828384
Save this elevation as: dwg / dxf
Click on number to view the details
A4150-1058 110163
Save this elevation as: dwg / dxf
Click on number to view the details
A4150-1048 101417212223313234
Save this elevation as: dwg / dxf
Click on number to view the details
A4150-1052 101216212223313234
Save this elevation as: dwg / dxf
Click on number to view the details
A4150-1057 110163
Save this elevation as: dwg / dxf
Click on number to view the details
A4150-1016 110121314162212223345681828384
Save this elevation as: dwg / dxf
Click on number to view the details
A4150-1049 11012121635
Save this elevation as: dwg / dxf
Click on number to view the details

Projekty fasady SAPA 4150

Lindesberg Hälsocenter

Sweden

Architekt: White Architects
Wykonawca stolarki: Glaslindberg
Produkty: Fasada SAPA: 4150, Dach: SAPA 5050, Drzwi 2086 i 2050
Photo: Åke E: son Lindman & White

World Maritime University, Malmö

Sweden

Building: World Maritime University
Location: Malmö. Year of construction: 2013–2015
Architect: Terroir & Kim Utzon Arkitekter A/S
Fabricator: Preconal Fasad AB
Developer: Stadsfastigheter, City of Malmö

Facades: Sapa Facade 4150
Doors: Sapa Door 2074

Photography: Hans Bonnevier

Hönekulla Höjd, Gothenburg

Sweden

Building: Apartment block, Hönekulla Höjd.
Location: Gothenburg, Sweden.
Building year: 2014-2015
Architect: Sweco Arkitekter Göteborg, Margareta Diedrichs
Fabricator: Alab Aluminiumsystem AB
Developer: Studor Projektutveckling AB

Facades: Sapa Facade 4150.
Doors: Sapa Door 2074.
Surface treatment, colour: Powder-coating, Akzo Nobel Gris 400 Sablé

Photographer: Hans Bonnevier

Spjelkavik School, Ålesund

Norway

Building: Spjelkavik school
Location: Ålesund, Norway
Building year: 2012-2015
Architect: Fortunen AS
Fabricator: H-Produkter AS
Developer: Ålesund Kommunale Eiendom KF

Facades: Sapa Facade 4150
Roof Glazing: Sapa Roof Glazing 5050
Doors: Sapa Door 2074
Surface treatment, colour: Powder-coating, RAL 7024

Photo: Fotograf Kristiansen AS

Villa, Kungsbacka

Sweden

Building: Villa Agnes.
Location: Kungsbacka, Sweden.
Building year: 2013
Architect: Kanozi Arkitekter
Fabricator: Göteborgs Metallpartier AB

Facades: Sapa Facade 4150 and 4150 SSG.
Roof Glazing: Sapa Roof Glazing 5050.
Doors: Sapa Door 2074. Windows: Sapa Window 1074.
Sliding Doors: Sapa Lift-and-Sliding Door 2160
Surface treatment, colour: Powder-coating, Sable Noir 2100

Photographer: Hans Bonnevier

District Heating Power Plant, Vojen

Denmark

Facility: Vojens Fjernverme
Place: Vojens, Danmark
Construction year: 2011
Architect: Tegnestuen Mejeriet A/S
Fabricator: Ejnar Christiansen Sølsted A/S
Proprietor: Jorton A/S, Rødekro

Facades: Sapa 4150
Glazed roof: Sapa 5050
Doors: Sapa 2074
Windows: Sapa 1074
Surface finish: Clear anodised

Photography: Jan Møller Madsen