SAPA 4150

Infill panels

Infill panel

For more information please contact our Architect Support

Glazing

Unprotected glazed surfaces that can be reached by persons shall be designed to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.

Glass thickness 23-48 mm

The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.

Opening units

The window frames are specially adapted to the glass rebate of the facade system for simple installation. The windows in the 1086 window system are available as tilt and turn, bottom- hung, top-hung and side-hung, inward opening units.

The 2086 door system includes inward and outward opening single or double leaf doors with frame profiles that are specially adapted to the glass rebate of the facade system for simple installation.

1086 windows, inward opening

- Profile depth 86 mm
- Insulated aluminium profiles
- Side, bottom or top-hung
- Tilt and turn
- Rebate for double and triple glazing units

1086 windows, outward opening

- Profile depth 86 mm
- Insulated aluminium profiles
- Side, bottom or top-hung
- Rebate for double and triple glazing unit

1086 block windows, inward opening

- Profile depth 86 mm
- Insulated aluminium profiles
- Tilt and turn
- Rebate for double glazing units
- Fals för 2-glas

4074 facade windows, outward opening

- Profile depth 88 mm
- Insulated aluminium profiles
- Top hung projection
- Bottom hung projection
- Rebate for double glazing units

2086 SX doors

- Profile depth 86 mm
- Insulated aluminium profiles
- Inward or outward opening
- Single or double leaf doors
- Rebate for double and triple glazing units

U values for glass facades

Formula for calculating the total U value of a facade, taking into account the glazing unit, the share of profiles and edge zone, affect the linear factor.

Ufasad = ( Ag * Ug + Af * Uf + Ig * ψg )  /  ( Ag + Af )

For more information please contact our Architect Support

Facade additions

Opinions differ among designers on how the outside joints of a glass facade should be shaped. We have two different decorative profile systems: Add and Expressive.

Add, offers a design concept with its visible fastening elements and characteristic groove. The add cap is also able to support solar shading elements, lightning conductors, down pipes, rain gutters, signboards and lighting.

Expressive, gives the designer more freedom in the play of light and shadow on the facade. It is also possible to design one's own decorative profiles if needed.

Add, decorative profiles

Add 42693 basic decorative cap with mitred connection.

Add 42693 basic decorative cap complemented with coloured infill cap.

Add 42693 basic decorative cap with large screw mounting.

Add, support system

Add 42693 basic decorative cap with downpipes

Add 42693 basic decorative cap with lightning conductor cable

Add 42693 basic decorative cape with connection for solar shading elements

Expressive, decorative profiles

Expressive 42695 flanged cap in horizontal arrangement combined with 42227cap in vertical arrangement

Expressive 68827 decorative cap in horizontal arrangement combined with 68823 wing cap in vertical arrangement

Expressive 42695 flanged cap in horizontal and vertical arrangement

Expressive 68819 T-cap in horizontal and vertical arrangement

Expressive 68827 U-cap in horizontal and vertical arrangement

Expressive 42813 pyramid cap in horizontal arrangement combined with 42811 cape in vertical arrangement