Avantis 75 HV is a high performance thermally broken three-chamber window system, which sets the highest standards of thermal insulation and stability. Avantis 75 HV is the ideal solution when very high performance, quality and a slim sightline are major requirements.
Avantis 75 HV SHI
| Sabit doğrama için minimum görünür genişlik | 68 mm |
| Orta kayıt profilinin minimum görünür genişliği | 108 mm |
| Kasa derinliği | 75 mm |
| Kanat derinliği | 85 mm |
| Maksimum pencere (genişlik x yükseklik) | 1200 x 2100 mm |
| Cam çıtası görünür yüksekliği | 40 mm |
| Sabit doğrama için cam kalınlığı | 21 - 58 mm |
| Açılır doğrama için cam kalınlığı | 18 - 54 mm |
| Camlama methodu | EPDM fitil veya silikon ile |
Isı Yalıtımı
SHI: Uf = 1,0 - 1,9 W/m2K
Results of the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels
EN ISO 10077-2
Isı Yalıtımı
SI: Uf = 1,7 - 2,2 W/m2K
Results of the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels
EN ISO 10077-2
Isı Yalıtımı
I: Uf = 1,9 - 2,3 W/m2K
Results of the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels
EN ISO 10077-2
Isı Yalıtımı
I: Uf = 1,9 - 2,3 W/m2K
Results of the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels
EN ISO 10077-2
Hava Geçirimsizlik
4 - 600 Pa
Air tightness refers to the amount of air that will travel through a window or door system in its closed position, both under positive and negative pressure.
EN 12207
Su Geçirimsizlik
E1200A - 1200 Pa
The test applies specified amounts of water spray to the outside face of the window (combination) while incrementally increasing the air pressure. The result defines the test pressure, time and position of any water infiltration.
EN 12208
Rüzgar Dayanımı
C4 - 1600 Pa (security 2400 Pa)
The test applies a series of positive and negative test air pressures. Measurements and inspections are made to asses relative frontal deflection and resistance to damage from wind loads.
EN 12210
Darbe Dayanımı
Class 3
EN 13049
fixed window
turning window inwards opening
tilt-turn window inwards opening
Combination of inward turning window with fixed window above
Combination of inward turning window and inward tilting window above
double inwards opening window; one turning vent, one tilt-turn vent
double window with one tilt-turn, inwards opening vent
combination of inwards tilt-turn window with fixed windows
Combination of inward opening window, fixed window and inward tilting windows
Inwards opening tilt-turn window with a centered upperlight
Avantis 75 HV is a high performance thermally broken three-chamber window system, which sets the highest standards of thermal insulation and stability. Avantis 75 HV is the ideal solution when very high performance, quality and a slim sightline are major requirements.
