Sapa Door 2074 in panel wall

Our insulated door system has a profile depth of 74 mm and uses 30 mm wide glass fibre reinforced polyamide strips. The frame profile is adapted for installation in light wall structures consisting of sheet metal and insulation material. The inside is complemented with a casing made of an aluminium profile specially developed for different wall thicknesses. Door leaf profiles are available for all types of locks.

  • Versions. Single-leaf and double-leaf.
  • Break-out protection. For outward opening single-leaf door.
  • Personal safety. Available with anti-finger trap edge.

Elevations & Details

A2074-1118 2122246
Save this elevation as: dwg / dxf
Click on number to view the details
A2074-1119 21222467
Save this elevation as: dwg / dxf
Click on number to view the details
A2074-1120 3132346
Save this elevation as: dwg / dxf
Click on number to view the details
A2074-1121 31323467
Save this elevation as: dwg / dxf
Click on number to view the details

Drawing texts

The texts are intended to help the specifiers to define which systems, fittings, glazing units, surface treatment alternatives and functions are required. They are later used by the licensed fabricators during the production of the finished products.

Download the text as .dwg
Download the text as .pdf

Clear dimension

Doors and entries should be designed with enough space (clear dimension) for person traffic and to facilitate passage in a wheel chair. Applicable standards and requirements should be taken into account.

Rebate door

= Clear dimension
= Frame outside dimension
= Wall opening
D with universal hinge= 139 mm
D with lap butt hinge= 133 mm

Anti-finger trap edge with a rubber strip



= Fri öppning
= Karmyttermått
= Väggöppning

Rebate door with hidden hinges

= Clear opening
= Frame outside dimension
= Wall opening

Glazing

Unprotected glazed surfaces that can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.

Functional dimensions

Glass or infill panels thickness 20-54 mm



The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.

Glazing

Glass thickness 20-54 mm


Double glazing unit

Triple glazing unit

Infill panels

Certain parts of the elements can or must be filled with infill panels. It is important to consider the backing and the surface layer of the panels. If the infill panels are exposed to heavy impacts or mechanical loads, the backing should be made of durable board and the surface layer should be made of stainless or glass enamelled steel sheet.

Infill panel F2

U value in the middle: 0.74 W/m2K
1,5 mm Aluminium sheet
4,8 mm Board
40 mm Insulation
4,8 mm Board
1,5 mm Aluminium sheet


Infill panel F3

U value in the middle: 0.74 W/m2K
1.5 mm Aluminium sheet
10 mm Chipboard
40 mm Insulation
1.5 mm Aluminium sheet

Infill panel F4

U value in the middle: 0.78 W/m2K
1.5 mm Aluminium sheet
40 mm Insulation
10 mm Sapa boarding



Fittings

Our door system can be easily equipped with the most common fittings available on the market. For optimum functionality it is important that the fittings work together.

Our standard fittings are shown below.

Hinges, examples

Bladgångjärn treblad
Universal hinge Lap butt hinge Hidden hinge

 

Pull handles

Handtag svängt
D pull handle with hidden mounting harmonises with the door leaf.
Height 300 mm, Ø 30 mm.
Art. no.: Sapa 14 128
Triangular pull handle
with hidden mounting harmonises with the door leaf.
Height 300 mm, Ø 30 mm.
Art. no.: Sapa 14 129
Semi-circular pull handle
with hidden mounting harmonises with the door leaf.
Height 300 mm, Ø 30 mm.
Art. no.: Sapa 14 130

Handles

   
Handle for modular
profile door.
Width 137 mm,
Ø 21 mm.
Art. no.: Sapa 14 132
 

Door closing devices

Door closure with arm.
According to supplier.

Sliding rail door closure.
According to supplier.

Built-in door closure.
According to supplier.
Automatic door closure.
According to supplier.

Threshold alternatives

Door openings should be designed without level differences from inside to outside. Sometimes a threshold is not required because of, for example, moisture or non prevailing weather conditions. When a threshold is installed, it should be as low as possible to facilitate passage. Applicable standards and requirements should be taken into account.

   
Door with rebate profile

Door with uninsulated threshold and stainless steel protection

   
Door with rebate profile, uninsulated threshold and stainless steel protection. Door with strip seal

Anti-finger trap protection

In order to reduce the risk of injury due to squeezing, we have developed a solution based on a socalled anti-finger trap edge. Applicable standards and requirements should be taken into account.

Door system 2074 with anti-finger trap edge with EPDM rubber strips.

Fixing principles

The number and location of fixing points depends on the size of the element. The adjustable frame bushing are fixed into the mounting plates according to the wall supplier.


 

Break-out protection

Outward opening single-leaf door
In order to reduce the risk of burglary through doors, we have developed a rebate profile with integrated break-out protection. The break-out protection profile is easy to replace if damage occurs. Clear anodising is recommended for optimum appearance. Only available for outward opening singleleaf doors.

Product overview

Our insulated door system has a profile depth of 74 mm and uses 30 mm wide glass fibre reinforced polyamide strips. The frame profile is adapted for installation in light wall structures consisting of sheet metal and insulation material. The inside is complemented with a casing made of an aluminium profile specially developed for different wall thicknesses. Door leaf profiles are available for all types of locks.

  • Versions. Single-leaf and double-leaf.
  • Break-out protection. For outward opening single-leaf door.
  • Personal safety. Available with anti-finger trap edge.
SAPA BUILDING SYSTEMS -
Please choose your language