Elegance 52 IN
Industrial steel-look
Elegance 52 IN is a project based system using I and T shaped profiles inside and out create an industrial feel to the curtain wall.
Elegance 52 IN description
- The Elegance 52 IN system is an extension of the Elegance 52 ST, using the same connection and drainage principles.
- The difference being, where the Elegance 52 ST system consists of tubular mullion and transom profiles, the Elegance 52 IN system uses a range of I and T shaped mullion and transom profiles, to create a slender interior design effect.
- The appearance can be continued externally with similarly shaped cover caps.
- Complimentary anchoring and movement solutions are also available to complete the look.
System Performances
Air Tightness
AE750
Air Tightness
Air tightness refers to the amount of air that will travel through a window or door system in its closed position, both under positive and negative pressure.
Water Tightness
RE750
Water Tightness
The test applies specified amounts of water spray to the outside face of the window (combination) while incrementally increasing the air pressure. The result defines the test pressure, time and position of any water infiltration.
Wind Resistance
3000 Pa
Wind Resistance
The test applies a series of positive and negative test air pressures. Measurements and inspections are made to asses relative frontal deflection and resistance to damage from wind loads.
Impact Resistance
I5 / E5
Impact Resistance
Technical drawings
Elegance 52 IN
Elegance 52 IN
Elegance 52 IN
Elegance 52 IN
Documentation
Product overview
Elegance 52 IN is a project based system using I and T shaped profiles inside and out create an industrial feel to the curtain wall.