Sapa Door 2074 design glazing bead

Door with design variations

Please note:  all products in the 74 systems expire December 31, 2019 and are replaced by the corresponding product in the 86 systems.

       
L-shaped
glazing bead
  Facade type
glazing bead
  Rectangular
glazing bead


Our insulated door system has a profile depth of 74 mm and uses 30 mm wide glass fibre reinforced polyamide strips. Symmetrically installed glazing unit with three alternative glazing beads: L-shaped, façade type and rectangular.

The frame profile has a fixed or a replaceable rebate profile. Door leaf profiles for narrow section locks are available. The doors can be easily combined with our partition system 3074.

Door 2074 Design glazing bead Performance

  • Versions. Single-leaf, double-leaf and meeting doors with or without side and top light.
  • Rebate for glazing units and infill panels. 20-54 mm.
  • Child safety. Available with anti-squeeze back edge.

Elevations & Details

A2074-1044 212223246
Save this elevation as: dwg / dxf
Click on number to view the details
A2074-1045 122122232436
Save this elevation as: dwg / dxf
Click on number to view the details
A2074-1046 12212223243
Save this elevation as: dwg / dxf
Click on number to view the details
A2074-1047 2122247
Save this elevation as: dwg / dxf
Click on number to view the details

Drawing texts

The texts are intended to help the specifiers to define which systems, fittings, glazing units, surface treatment alternatives and functions are required. They are later used by the licensed fabricators during the production of the finished products.

Download the text as .dwg
Download the text as .pdf

Clear dimension

Doors and entries should be designed with enough space (clear dimension) for person traffic and to facilitate passage in a wheel chair. Applicable standards and requirements should be taken into account.

Rebate door

= Clear dimension
= Frame outside dimension
= Wall opening

D with universal hinge = 147 mm
D with lap butt hinge = 141 mm
67 mm or 70 mm with replaceable rebate profile

Anti-finger trap edge with a rubber strip



A = Clear dimension
= Frame outside dimension

Rebate door with hidden hinges


= Clear dimesion
= Frame outside dimension
D = 94,5 mm
 or 97,5 mm with replacable rebate profiles
= 67 mm or 70 mm with replacable rebate profiles

Glazing

Unprotected glazed surfaces that can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.

Glass thickness 20-30 mm

 

Fittings

Our door system can be easily equipped with the most common fittings available on the market. For optimum functionality it is important that the fittings work together.

Our standard fittings are shown below.

Hinges, examples

Bladgångjärn treblad    
Universal hinge   Lap butt hinge
  Hidden hinge

Pull handles

D pull handle
with hidden mounting harmonises with the door leaf.
Height 300 mm, Ø 30 mm.
Art. no.: Sapa 14 128

Triangular pull handle
with hidden mounting harmonises with the door leaf.
Height 300 mm, Ø 30 mm.
Art. no.: Sapa 14 129

Semi-circular pull handle with hidden mounting harmonises with the door leaf.
Height 300 mm, Ø 30 mm.
Art. no.: Sapa 14 130

Door closing devices

Door closure with arm.
According to supplier.

Sliding rail door closure.
According to supplier.

Built-in door closure.
According to supplier.

Automatic door closure.
According to supplier.

Anti-finger trap protection

In order to reduce the risk of injury due to squeezing, we have developed a solution based on a socalled anti-finger trap edge. Applicable standards and requirements should be taken into account.

Door system 2074 with anti-finger trap edge with EPDM rubber strips.

Fixing principles

For a folding door to function in a satisfactory manner it is important that the fixing elements and the base structure along the top edge and the side are stable. The rail profile used for hanging up the door leaf fittings must be well anchored so that the clearance between the door leafs and the floor is sufficient.

Frame attachment with
twist anchor

Frame attachment with
adjustable frame bushing

Frame attachment with
bolt and welded plate

Frame attachment with
screw

Break-out protection

In order to reduce the risk of burglary through doors, we have developed a rebate profile with integrated break-out protection. The break-out protection profile is easy to replace if a damage occurs. Clear anodising is recommended for optimum appearance. Only available for outward opening single-leaf doors.




Product overview

Please note:  all products in the 74 systems expire December 31, 2019 and are replaced by the corresponding product in the 86 systems.

       
L-shaped
glazing bead
  Facade type
glazing bead
  Rectangular
glazing bead


Our insulated door system has a profile depth of 74 mm and uses 30 mm wide glass fibre reinforced polyamide strips. Symmetrically installed glazing unit with three alternative glazing beads: L-shaped, façade type and rectangular.

The frame profile has a fixed or a replaceable rebate profile. Door leaf profiles for narrow section locks are available. The doors can be easily combined with our partition system 3074.

SAPA BUILDING SYSTEMS -
Please choose your language