General Cargo Platform

About body side system 25 mm

For body sides, rear doors, full-height rear doors and front bulkheads. The body side profiles are connected together using snap-in joints and the edge profiles are fastened with pop rivets from the inside and the outside. Delivered as customized finished body sides complete with accessories, or as profiles in long lengths. The 201-25 body side system includes profiles suitable for different types of edge strips, pillars, locks and hinges.

The body side profiles are available in heights of 50, 100, 150 and 200 mm, which can be combined to obtain the required total height. Some bottom and edge profiles have grooves for rubber strips that are used for sealing or noise dampening. The profiles come with different wall thickness values from 1.8 mm to 4 mm on the inside.

All stocked profiles are anodized. Anodizing results in an attractive and wear-resistant surface that is easy to clean.

General cargo platform

Configuration as shown above

Front bulkhead

Body sides

Rear doors:
Top profile: F36029 Top profile: F36029 Edge profile: F68790
Bottom profile: F36032 Bottom profile: F36032 Rubber strip: F70070
Edge profile: F36035 Edge profile: F36170 Edge profile left door towards center: F36036
  Hinge: F19225 Hinge: F50850
  Body side lock: F50060  
Example 1 body side

Top profile: F36029
Bottom profile: F36032
Edge profile: F36170
Hinge: F50040KH/LH
Body side lock: F19225

Example 2 body side

Top profile: F36029
Bottom profile: F36033
Edge profile: F36170
Hinge: F50060
Body side lock: F19225

Example 3 body side

Top profile: F36029
Bottom profile: F36148
Edge profile: F36170
Hinge: F50030KH10/LH
Body side lock: F19225
Cover strip: F70082 (XBLACK)

Example 4 body side

Top profile: F71688
Bottom profile: F39641
Edge profile: F36165
Hinge: F50700KH/LH
Body side lock: F19220

Example 5 body side

Top profile: F36029
Bottom profile: F36034
Edge profile: F36165
Hinge: F50040KH/LH
Body side lock: F19220

Example 6 rear door

Top profile: F36029
Bottom profile: F36032
Edge profile: F36165
Hinge: F50850
Body side lock: F19220

Example 7 body side

Top profile: F36159
Bottom profile: F36148
Edge profile: F36170
Hinge: F50030KH/LH
Body side lock: F19225

Example 8 front bulkhead

Top profile: F36029
Bottom profile: F36032
Edge profile: F36165

Example 9 front bulkhead

Top profile: F36029
Bottom profile: F36151
Edge profile: F36035

Example 10 rear door

Edge profile: F68790/F36036
Hinge: F50850
Rubber strip: F700700

Profiles

The body side profiles are available in heights of 50, 100, 150 and 200 mm, which can be combined to obtain the required total height. Some bottom and edge profiles have grooves for rubber strips that are used for sealing or noise dampening. The profiles come with different wall thickness values from 1.8 mm to 4 mm on the inside.

All stocked profiles are anodized. Anodizing results in an attractive and wear-resistant surface that is easy to clean.

Top profiles

Item no.: F36029
Item no.: F71688
Item no.: F36156
Item no.: F36160
Item no.: F36159
Item no.: F36158

Middle profiles

Item no.: F36026
Item no.: F36027
Item no.: F36028
Item no.: F36155
Item no.: F36154
Item no.: F36153
Item no.: F38933
Item no.: F38932
Item no.: F36030

Bottom profiles

Item no.: F36032
Item no.: F36033
Item no.: F36191
Item no.: F36037
Item no.: F36034
Item no.: F39641
Item no.: F36148
Item no.: F36149
Item no.: F36150
Item no.: F36151
Item no.: F36152

Edge profile

Item no.: F36035
Item no.: F36036
Item no.: F36176
Item no.: F36177
Item no.: F68790
Item no.: F63156
Item no.: F36165
Item no.: F36170
Item no.: F36166
Item no.: F36183
Item no.: F36163
Item no.: F36167
Item no.: F36178
Item no.: F36048

Accessories

Hinge

Item no.: F50059
Item no.: F50060
Item no.: F50040KV/KH
Item no.: F50040LV/LH
Item no.: F50045
Item no.: F50046
Item no.: F50010KV
Item no.: F50010LV
Item no.: F50030KV/KH
Item no.: F50030LV/LH
Item no.: F50035
Item no.: F50025K
Item no.: F50025L
Item no.: F50015
Item no.: F50020
Item no.: F50120
Item no.: F50121
Item no.: F50140
Item no.: F50150
Item no.: F50700KV/KH
Item no.: F50700LV/LH
Item no.: F50850
Item no.: F50855

Body side lock bracket

Item no.: F19220
Item no.: F19225
Item no.: F19240

Hanging rod/Adjustment sleeve

Item no.: F19250
Item no.: F19260
Item no.: F39743

Rubber strip/Cover strip

Item no.: F70030
Item no.: F70050
Item no.: F70060
Item no.: F70065
Item no.: F70070
Item no.: F70080
Item no.: F70090

End plug/Cover plug/End cover

Item no.: F02505
Item no.: F80200
Item no.: F80210
Item no.: F81304
Item no.: F81305

Care and maintenance

Care and maintenance

Cleaning
Products should be cleaned regularly to keep them looking attractive. Clean products look more attractive, perform better and are more durable. Do not use alkaline cleaners. Aluminium profiles are sensitive to alkaline substances and should never come into contact with them. Do not use abrasive detergents or scrub with abrasive sponges or cloths, as this is likely to cause mechanical damage. It is always best to use only water and a sponge. However, a neutral detergent can be used if necessary.

Maintenance
The product should be regularly checked and adjusted to ensure good function and a long lifespan. Moving parts should be kept lightly greased to prevent them from sticking. Check the fittings to make sure they are correctly positioned and their bolts are tightened.

Storage and handling

To preserve the high surface finish that the profiles have on delivery, observe the following guidelines for storage and handling:

Keep dry. Corrosion cannot occur without water.
Keep covered. Keep the covering material on as long as possible as it protects the profiles from water and dirt.
Ensure ventilation. Ventilate the storage area if possible. This will help keep the products dry and looking their best.

Contact corrosion can occur if rain or condensation collects on the surface of untreated aluminium profiles that are stored in contact with one another, for instance during storage or transport.
This causes water stains with an altered surface structure.
These stains are very difficult to remove. However, they do not affect the profiles' strength.

Protect aluminium profiles from splatter from welding and grinding, as this can result in small spots that are difficult to remove.

Product overview

SAPA BUILDING SYSTEMS -
Please choose your language