Confort Smartline is an optimised, high performing, thermally insulated
sliding door with a slim sightline. The system combines this highly
attractive aesthetic line with remarkable energy efficiency. The sliding
door belongs to an entirely new generation of sliding systems thanks to
technical innovation and well-considered design.
Confort Smartline profiles are coupled with 50 mm glass fibre reinforced polyamide strips, which reduce thermal conduction. These polyamide strips are specially designed in order to improve the thermal values, without adding extra internal inserts in the profiles. The bigger cavities between profiles are insulated with customised PE strips. The result is that Confort Smartline achieves a high thermal performance level and improved total insulation, leading to lower total energy consumption and a reduced environmental impact.
The system accommodates glazing up to 53 mm
Thermal insulation
Uf up to 1,40 W/m²K (SHI - 1-rail)
Results of the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels
EN ISO 10077-2
Thermal insulation
Uf up to 2,48 W/m²K (SHI - 2-rail)
Results of the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels
EN ISO 10077-2
Air Tightness
4 (600 Pa) lift-slide version
Air tightness refers to the amount of air that will travel through a window or door system in its closed position, both under positive and negative pressure.
EN 12207
Water Tightness
E9 (900 Pa) lift-slide version
The test applies specified amounts of water spray to the outside face of the window (combination) while incrementally increasing the air pressure. The result defines the test pressure, time and position of any water infiltration.
EN 12208
Wind Resistance
C3 - 1200 Pa, sec. 1800 Pa (lift-slide version)
The test applies a series of positive and negative test air pressures. Measurements and inspections are made to asses relative frontal deflection and resistance to damage from wind loads.
EN 12210
Min. sightline monorail (fixed glazing) |
53 mm |
Min. sightline monorail (fixed & sliding part) |
132 mm |
Min. sightline monorail (fixed & lift-slide part) |
127 mm |
Min. sightline 2-rail (fixed & sliding part) |
138 mm |
Min. sightline 2-rail (fixed & lift-slide version) |
133 mm |
Min. sightline 2-rail (straight cut, slide version) |
122 mm |
Min. sightline 2-rail (straight cut, lift-slide version) |
127 mm |
Sightline interlock |
92 mm |
Profile depth 2-rail |
160 mm |
Profile depth 3-rail |
250 mm |
Profile depth vent |
70 mm |
Max dimensions vent - hardware related* - (W x H) *weight limit = 250 kg |
3100 x 2800 mm |
Infill thickness sliding parts 2- and 3-rail |
23 - 53 mm |
| Glazing method | dry glazed with EPDM gaskets or silicon |
| Thermal break | 50 mm PA 6.6 GF25 (30 or 35 mm in the vent) |
| Thermal insulation SHI version 1-rail | Uf up to 1,40 W/m²K (EN ISO 10077-2) |
| Thermal insulation SHI 2-rail | Uf up to 2,48 W/m²K (EN ISO 10077-2) |
| Thermal insulation SI version 1-rail | Uf up to 1,75 W/m²K (EN ISO 1007-2) |
| Thermal insulation SI version 2-rail | Uf up to 2,59 W/m²K (EN ISO 10077-2) |
| Thermal insulation Basic version 1-rail | Uf up to 1,88 W/m²K (EN ISO 10077-2) |
| Thermal insulation Basic version 2-rail | Uf up to 2,64 W/m²K (EN ISO 10077-2) |
| Air tightness lift-slide version | 4 - 600 Pa (EN 12207) |
| Water tightness lift-slide version | E900 - 900 Pa (EN 12208) |
| Wind resistance lift-slide version | C3 - 1200 Pa, security 1800 Pa (EN 12210) |
1-rail frame, 1 sliding vent
1-rail frame, 1 sliding vent
1-rail frame, 2 sliding vents
1-rail frame, 2 sliding vents
2-rail frame, 1 sliding vent, 1 fixed vent
2-rail frame, 1 sliding vent, 1 fixed vent
2-rail frame, 2 sliding vents
2-rail frame, 3 sliding vents
2-rail frame, 2 sliding vents, 1 fixed vent
2-rail frame, 4 sliding vents
2-rail frame, 2 sliding vents, 2 fixed vents
2-rail frame, 1 sliding vent, 2 fixed vents
3-rail frame, 3 sliding vents
3-rail frame, 6 sliding vents
1-rail lift-slide
1-rail lift-slide
1-rail, two lift-sliding vents
1-rail frame, 2 fixed elements, 2 lift-slide vents
2-rail frame, 1 fixed vent, 1 lift-slide vent
2-rail frame, 1 fixed vent, 1 lift-slide vent
2-rail frame, 2 lift-slide vents
2-rail frame, 3 lift-slide vents
2-rail frame, 1 fixed vent, 2 lift-slide vents
2-rail frame, 2 fixed vents, 1 lift-slide vent
2-rail frame, 2 fixed vents, 1 lift-slide vent
2-rail frame, 4 lift-slide vents
2-rail frame, 2 fixed vents, 2 lift-slide vents
3-rail frame, 3 lift-slide vents
3-rail frame, 2 lift-slide vents, 1 fixed vent
3-rail frame, 2 lift-slide vents, 1 fixed vent
3-rail frame, 6 lift-slide vents
3-rail frame, 6 lift-slide vents
3-rail frame, 4 lift-slide vents, 2 fixed vents
3-rail frame, 4 lift-slide vents, 2 fixed vents
Confort Smartline is an optimised, high performing, thermally insulated
sliding door with a slim sightline. The system combines this highly
attractive aesthetic line with remarkable energy efficiency. The sliding
door belongs to an entirely new generation of sliding systems thanks to
technical innovation and well-considered design.
