Elegance 72

Unitised Curtain Walling

Elegance 72 is a unitised curtain walling system that brings together the benefits of factory production control and speed of installation on site. Modular units are manufactured including glazed units in workshop conditions, where quality can be strictly controlled. The fixing lugs are built into the perimeter, ensuring ease of handling during transportation and arrival on site.

Introduction

Extreme performance

Cost effective solution

Characteristics

Dimensions
Minimum sightline 72 mm
Minimum sightline transom 52 / 72 mm
Minimum sightline inward opening window 161 mm
Minimum sightline outward opening window 130 mm
Profile depth element

85 - 177 mm

adaptable to project requirements

Maximum size element single unit (W x H) 1500 x 4000 mm
Maximum size element double unit (W x H) 2400 x 4000 mm
adaptable to project requirements
 
Glazing
Rebate height 21 mm
Infill thickness with 36 mm strip 6 - 50 mm
Infill thickness with 28 mm strip 6 - 38 mm
Glazing method dry glazed with EPDM gaskets or silicon

Performances

Thermal insulation

transom: 1,7 < Ut < 3,1 W/m2K

Thermal insulation

Results of the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels

Thermal insulation

mullion: 1,9 < Um < 3,4 W/m2K

Thermal insulation

Results of the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels

Air Tightness

A4

Air Tightness

Air tightness refers to the amount of air that will travel through a window or door system in its closed position, both under positive and negative pressure.

Norm

EN 12152

Water Tightness

R1500

Water Tightness

The test applies specified amounts of water spray to the outside face of the window (combination) while incrementally increasing the air pressure. The result defines the test pressure, time and position of any water infiltration.

Norm

EN 12154

Wind Resistance

3000 Pa (wind safety 4000)

Wind Resistance

The test applies a series of positive and negative test air pressures. Measurements and inspections are made to asses relative frontal deflection and resistance to damage from wind loads.

Norm

EN 13116

Forced Entry Resistance

RC3

Forced Entry Resistance

Description for Forced Entry Resistance

Norm

EN 1627 : 2011

Technical drawings

Case studies

Product overview

Elegance 72 is a unitised curtain walling system that brings together the benefits of factory production control and speed of installation on site. Modular units are manufactured including glazed units in workshop conditions, where quality can be strictly controlled. The fixing lugs are built into the perimeter, ensuring ease of handling during transportation and arrival on site.

SAPA BUILDING SYSTEMS -
Bitte wählen Sie eine Sprache aus